Call Us +91- 9619946844 info@radissonimpex.com

Supplier of Jindal Hot Rolled Plates, Huge Selection. Best Prices. Check prices before you buy., Jindal Hot Rolled Plates Suppliers Exporters Distributors Stockist Mumbai India

Radisson Impex Distributors of Jindal Hot Rolled Plates Plates in India.

Brand Sheet & Plates :: Jindal Hot Rolled Plates

Jindal Hot Rolled Plates Stockist Suppliers Exporters Manufacturers Mumbai India

HOT ROLLED PLATES

Jisco re-rolls, Hot Rolled plates from M.S. Slabs. It has an installed capacity of 2,80,000 tpa. This plant is located at Vasind, 70 Km away from Mumbai, Maharashtra, India. H.R. plates are manufactured from slabs which are procured from sister concern JVSL Karnataka ,JSPL, Raigad and from international sources. The hot rolled manufacturing facilities which, perhaps has the lowest variable cost in the world, have the ability to take up even the small orders.

DIVERSE APPLICATIONS

  • Automobile - Hot & cold forming
  • Infrastructure viz power, roads, dams, bridges, ports, refineries etc.
  • Railways
  • Storage Tanks
  • Pipes
  • General Engineering
  • Machine & equipment building
  • Pre - engineered building system
  • Transmission Towers
Specification & GradeStructrual Steel -

BS4360 1986 Gr 43 A/ B/ C
ASTM - A - 36
DIN 17 100 1980 Gr St 37-2
EN 10 025 1993 Gr S 275 JR/ JO
& other equivalent grades

High Tensile Steel -

DIN 17 100 1980 Gr St 44-2/ 44-3/ 52-3
EN 10025 1993 Gr S 355 JR/ JO
BS 4360 1986 Gr 50 A/ B/ C/ D
ASTM - A - 572 Gr 50/ 60 
& other equivalent grades

Thickness8 to 150 mm
 
Width1220 mmFor 8 mm to 150 mm thickness
 1250 mmFor 8 mm to 25 mm thickness
 1500 mmFor 8 mm to 32 mm thickness
Length2440 mm to 10000 mmUpto 10 mm thickness
 2440 mm to 13000 mmUpto 150 mm thickness
Edge ConditioningMill Edge


Tolerances
 Width1220 mm+/-30 mm
  1250 mm+30 mm/ -0 mm or +/- 30 mm
  1500 mm+30 mm/ -0 mm or +/-30 mm
 LengthUpto 6000 mm+/-30 mm or +60/ -0 mm
  6000 mm to 13000 mm+/-50 mm or +100/ -0 mm
 ThicknessAs per standard
STRUCTURAL STEEL
IS 2062:1999 Gr A/ B/ C 
(including Copper Bearing Quality) 
IS 10748 Gr I, II & III
BS 4360
:
1990 Gr 43 A/ B/ C
ASTM - A - 36
DIN 17 100:1980 Gr St 37-2/ RSt 37-2, St 44-2, St 44-3
EN 10 025:1993 Gr S 275 JR/ JO and 
other equivalent grades

HIGH TENSILE STEEL
IS 8500:1991 Gr Fe 490/ 490 B, Fe 540/ 540 B 
(including Copper Bearing Quality) 
Equv SAILMA 350/ 350 Hi/ 410/ 410 Hi 
IS 961 Gr Fe 540 W-HT
DIN 17 100:1980 Gr St 52-3
DIN 17 102:1983 STE 255, STE 285, STE 315, STE 355, STE 380, STE 420 (Including Micro-alloyed High Tensile Grades)
EN 10025:1993 Gr S355 JR/ JO/ J2G3/ J2G4/ K2G3 & K2G4
BS 4360:1990 Gr 50 A/ B/ C/ D/ E
ASTM - A - 572 Gr 50/ 60 and 
other equivalent grades

MEDIUM CARBON
C - 45, C - 35, C - 30, SAE - 1030, En - 8 and other equivalent grades

WEAR RESISTANT QUALITY
Equv SAIL HARD, Equv TISCRAL, JISCO HARD
THICKNESS:8 - 140 mm
WIDTH:1200/ 1250/ 1500 mm
LENGTH:2500 - 13000 mm

COLD ROLLED - CLOSE ANNEALED (CRCA) SHEETS & COILS

Jisco has a CRCA capacities of 100,000 tpa, in addition to this Jisco markets 60,000 tpa cold rolled products of JSL's Vasind plant. Cold-rolled steel is satisfactorily used by the most demanding customers of automobile and white goods segments. Hot-rolled coils which is the basic raw-material is sourced from sister concern JVSL, Toranagallu. The products are tailor made to suit customer requirements.

DIVERSE APPLICATIONS
  • Automobiles
  • Electrical Panels
  • Furniture
  • White goods
  • Transformers
  • Oil Barrels & Drums
  • General Engineering
COLD ROLLED CLOSE ANNEALED COILS
Thickness
:
0.40 mm to 3.15 mm
Width
:
150 mm to 1250 mm
Edge Condition
:
Trimmed/ as rolled - as per customers requirement
Coil I. D.
:
508 mm/ 610 mm
Coil Weight
:
500 Kg to 10 MT*
Finish
:
Bright & Matte
Grade/ Quality
:
D, DD, EDD & weather resistant steel grades.

* Packed in weather proof laminated HDPE with straps through eye and circumference.


COLD ROLLED CLOSE ANNEALED SHEETS
Thickness
:
0.45 mm to 3.15 mm
Width
:
200 mm to 1250 mm
Length
:
600 mm to 4000 mm
Edge Condition
:
Trimmed
Packet Weight
:
1.5 MT to 3.0 MT*
Finish
:
Bright & Matte
Grade/ Quality
:
D, DD, EDD & weather resistant steel grades.

* Packed in weather proof Laminated HDPE with Box Strapping

SPECIFICATIONS

STANDARD OF SPECIFICATION
QUALITY/GRADE
IS 513/94
BS 1449/91
JIS 3141/96
DIN 1623/83
Drawing
Deep Drawing
Extra Deep Drawing
D
DD 
EDD
CR-4
CR-3 
CR-2/CR-1
SPCC
SPCD 
SPCE
St.12
RRSt.13
RRSt.14

GALVANISED SHEETS & COILS

Jisco is the largest manufacturer of Galvanised steel products in India accounting for almost 17 % of India's galvanised steel products. Jisco has an installed galvanising capacity of 710,000 tpa at its manufacturing lines at Vasind & Tarapur. The state of the art galvanising lines ensures that the end-products meets the exacting expectations and specifications. Superior product quality has prompted the company to brand its Galvanised products and is being marketed under the brand name jindal steel plates.

GALVANISED COILS & SHEETS - PLAIN/CORRUGATED

DIVERSE APPLICATIONS
  • Roofing/Cladding
  • Doors/Windows
  • Structural Engineering
  • Automobiles
  • Air Conditioning/Ducting
  • Insulation
  • Partition Profiles
  • Furniture
  • Appliances
  • Trunks/Barrels/Drums/Buckets
Specification & Grade
a.
JIS G 3302
b.EN10142(FEP02), EN10147(S2250GD)
c.ASTM A 653, CQ, LFQ
 


Thickness 0.14 mm to 2.5 mm

 
Width 762 mm to 1250 mm

 
Sheet Length 3050 mm (max.)for galvanised plain
  3600 mm (max.)

for galvanised corrugated
Zinc Coating 100 to 300 gm/ m2

 
Coil woundControlled Stagerred 
Coil WeightThickness upto 0.25 mm, 2 MT - 5 MT.
Thickness 0.25 mm to 0.35 mm & width upto 1000 mm, 2 MT- 8 MT.
Thickness 0.35 mm & above & any width, 4 MT - 22 MT. 

Skin Pass

  

Stretch levelled

for 0.35 mm to 2.5 mm thickness 

Spangle Regular/ Minimised 
Surface Passivation Dry Chromatic
LFQ Test 0.35 mm to 1.20 mm
Packing Seaworthy (Metallic) 
Type of Loading Break Bulk/ Container

Width Before
Corrugation 
(mm)
Width After
Corrugation 
(mm)
Pitch
(mm)
Depth
(mm)
Number of 
Corrugations
762
665
75.62
17.75
8
900
762
72.5
18.7
10
1000
875
73.5
18.12
11
1000
900
75.92
16.98
11

GALVANISED SHEETS AND COILS

PLAIN :
Specifications
:IS 277
JIS-G3302 
ASTM A-653 (or equivalent to all the above)
Grades
:
Soft or Lock forming 
Drawing 
Deep Drawing 
Structural
Thickness:0.14 mm - 2.5 mm
Width:1250 mm (max.)
Sheet Length:3658 mm (max.)
Surface Finish:Regular or minimum 
spangles 
Stretch levelled 
Skin passed (matt) with zero or minimum spangles (as per customer's requirement)
Zinc Coating:100-300 gms/ m2

CORRUGATED :
Specifications:IS 277 
JIS-G3302 
ASTM A-653 (or equivalent to all the above)
Grades:Roofing (Full Hard)
Thickness:0.14 mm - 0.70 mm
Width:1065 mm (max.)
Sheet Length:3658 mm (max.)
Surface Finish:Regular spangles
Zinc Coating:80 - 300 gms/ m2

 

We have Exported Sheet Plate to over 60 countries including India,United Arab Emirates, Kenya, Bangladesh, Qatar, United States, Malaysia, South Korea, Indonesia, Singapore, United Kingdom, Bangladesh, Japan, China, Thailand, Taiwan, Italy, Iran, Vietnam, Poland, Egypt, Canada, Turkey, Sri Lanka, Pakistan, Saudi Arabia, Kuwait, Russia, Nigeria, France, Denmark, Germany, Greece, Ukraine, Oman, Switzerland, South Africa, Romania, Colombia, Iraq, Australia, Netherlands, Portugal, Spain, Brazil, Norway, Paraguay, Azerbaijan, Trinidad & Tobago, Mexico, Hong Kong, Philippines, Tunisia, Bahrain, Serbia, Belarus